Subject | Text |
Grundig TV Dead | Hi,
I have a Grundig 28wf100 CRT tv thats a few years old.
Last week it turned itself off and |
Re: PLASMA JVC GD-V4210 PCE no picture | [quote:f966cb87ec="ajjc"]hi i have a JVC GD-V4210 PCE it has power but it has no picture or the fans |
|
Blue vertical line, no picture | It happened when I had replaced LNBF and went back to check if the signal came back, led/LCD tv disp |
Akai CT-T21N32S TV. | Hi All,
I have an Akai CT-T21N32S which will not fire up, the red LED is illuminated on the front |
| [quote:9178dc8f71="wwiiflyer"]Looked at the blue ceramic caps -- only saw two small ones; but, they |
DTH 20Q2FS | :D Hi, I need any info,Service manual, schematic diagrams for this TV Daewoo DTH 20Q2FS.
Thanks for |
JVC AV-3551S Any info on this model | Does anyone have any info on this model. Can't find anything online. ESI didn't have anything either |
thanks! | thanks, walter58 for your advice. sounds like you know your stuff! misfortunately, this is the diagn |
| the power led is not blinking, it is the ontimer led which is blinking. the power led is in its norm |
Sony KV2150R help please with repairing this set. | The Stand by/timer LED keeps blinking all time, I have changed the full block of power supply from t |
Dead Dell 1025HE | I'm attempting to repair a Dell 1025HE 17" monitor (essentially a Nokia 447S) for a friend.
sympt |
Bush TV is dead - BTVDi31227 Dead | Bush 22 in combi TD/DVD & iPOD dock
Model BTVDi31227
Out of warranty (by 35 days - typical)
N |
| Daewoo DTQ-20V1 is a chassis CN-001M.
Check this file:
http://www.eserviceinfo.com/download.php |
dp42sp | hi, im new here. I have a 42' plasma dawoo that broke yesterday. the bottom half of the screen wen |
NEC Multisync FP950 or FP1350 schematic needed | After some sparks (I heard), the image has gone, now just the front led is on :(
Where can I find |
Sony KV32FS100 Won't Power On | My 32' Sony Vega won't power on. The Standyby Led continuesly blinks 5 times. Looking for fault code |
Toshiba Bomba 29A3SH Will not show picture | Hi guys,
When I switch on the TV I can hear it turned on, the power led blinks in red and green c |
|
Soldering help needed., It don't flow right | I’ve made my first DIY PCB, I’m trying to solder Leds into the holes and I’m a complete newbe, I got |
Is this normal appearance for and amplifier IC?? | I'm in uncharted territory (for me, anyway). I'm a radio tech--and don't find much in a CB I can't |
Bush ws6671sil - 11AK19Pro chassis - Help needed! | Hello!
First off, this site is probably the most useful electronic repair site I have come across. |
TV SHARP 81GF-63E (Schematics) | Hello Everyone/ Hola Todos/ Salut Tout le monde
J'ai une TV Sharp modèle 81GF-63E. Elle ne s |
Compaq Monitor V700, schematic diagram | Hello,
I work at GM Antwerp, Belgium, and we have 9 defective V700 compaq monitors, all with the |
| Hello
I am experiencing the same symptoms. Set turned off on me yesterday and will not come back |
Stanby light flashing goodmans W322 NS | The tv will not power up, the standby led flashes very dimly continuously. Any ideas what the proble |
TV Philips 32pw8506, entering SDM via pins Not working! | Hi there.
I played around with the settings in the service alignment menu(SAM), and now unfortuna |
| the power led is not blinking, the power led is normaly lighted red. it is the on-timer led (orange |
Problem with Philips C2082DAS | I got problem with my Philips C2082DAS monitor.
When I power it, LCD shows FW version and then it i |
A Philips TV gives no sound nor picture | Hi ,
So the TV gives no sound nor video , but the power LED is on ... what could be the problem ? |
kp53S75 dead, want to replace gboard | I called a tech and he was really creepy, would not give me a breakdown of what he quoted, said it h |
Please service manual for samsung monitor model cmc-431x | Hello I try to find a SERVICE MANUAL for the monitor daewoo model cmc-431x chassis 1431x anybody can |